Step 1
Insert the bead all the way in the hook and wrap the lead wire 2/3 of the way and push it up front.
Step 2
Wrap the lead wire and shank with thread all the way back to the curve of the hook.
Step 3
Tye the turket biot back to back so the curve is pointing outside.
Step 4
Tye the copper wire to the shank.
Step 5
Build up a nice dubbing cord with the dubbing twister.
Step 6
Wrap it up forward leaving 1/3 of the shank clear.
Step 7
Now wrap your body with the copper wire the opposite direction of the last step.
Step 8
Tye the Mylar and the legs.
Step 9
Tye the other leg.
Step 10
Build a cord with the red dubbing now.
Step 11
Wrap it all the way up to head. Make a knot right in between the legs and the bead.
Step 12
Tye the Mylar over the red dubbing.
Step 13
Cover the Mylar with the UV clear fly finish.
Step 14
It looks this way but will become clear once cured.
Step 15
Cure the clear finish with the UV lamp for at least 15 seconds. Direct sunrays work best.
Step 16
Now the fly is completed, you can trim the legs to your own taste or preference.
